BIOS update on EKF PC3-ALLEGRO: =============================== A BIOS update is accomplished by programming the SPI (*1) flash memory on EKF PC3-ALLEGRO. Follow the steps described below for a BIOS update on EKF PC3-ALLEGRO: - Copy all files of the ZIP archive to a bootable DOS formatted device (preferable an USB stick) - Boot the system from this device - When the DOS prompt displays, press - Wait for end of programming, view result. If an error occurs during programming (which is very unlikely), try batchfile PS.BAT once more BEFORE the system is reset - When finished successfully restart your system with reset-button (front panel handle on PC3-ALLEGRO), a power-off-on sequence or by pressing CTRL-ALT-DEL WARNING: Do not interrupt the programming procedure in order to avoid damage of the BIOS binary. Programming takes about 60 seconds when the 4MB BIOS binary is loaded from an USB-Stick. The new BIOS is present after resetting the system. Note that all BIOS Setup parameter will be reset to default settings. (*1) SPI = Serial Peripheral Interface Any questions? Send an Email to support@ekf.de 2013-08-09 EKF